Instructions :
Install Mentor PADS 2007.4 Using the autorun.exe in the main distribution folder :
주 배포 폴더에있는 Autorun.exe를 사용하여 멘토 패드 2007.4 설치 :
Choose Install PADS Products option.
When "choose licensing scheme" appears, choose "skip or postpone license setup".
Choose your default project path.
Select "install products", choose which products to install (i install all of them).
Wait for some time and the installer will complete.
패즈 제품 설치 옵션을 선택합니다.
"라이센스 정책 선택" 표시에서 "생략하거나 라이센스를 설치 연기" 선택.
기본 프로젝트의 경로를 선택합니다. -> C:\MentorProject or D:\???
"Install Products"를 선택하고 어떤 제품을 설치할 지 선택. -> 전부 또는 용량에 따라 선택
설치 완료 후
Now to generate your license and modify the MGLS.DLL files :
이제 귀하의 라이센스를 생성하기 위해 MGLS.DLL 파일을 수정한다 :
This instruction guide assumes installation to D:\MentorGraphics,
if you have installed to a different location, modify copy_dll.bat to
point to your installation location. Run copy_dll.bat from this CRACK directory, it will
copy the modified MGLS.DLL file to the locations required.
D:\MentorGraphics 에 설치하는 것을 가정으로,
만약 다른 위치에 설치하였다면 설치위치를 설정하기 위해 copy_dll.bat 수정
copy_dll.bat 를 이 crack 폴더(MGLS.DLL이 있는 폴더)에서 실행하면 수정된 MGLS.DLL 이 필요한 위치에 복사된다.
The make_license.bat file assumes the destination of the license files will be c:\flexlm,
if you wish you can change this location.
Run make_license.bat, licenses will be generated and copied to c:\flexlm.
make_license.bat 파일은 라이센스 파일이 C:\FLEXlm 에 있다고 가정하며
필요하다면 이 위치를 변경할 수있습니다.
make_license.bat 를 실행하면, 라이센스가 생성되고 이를 C:\FLEXlm 으로 복사함.
Now run autorun.exe again, and choose the "install license file" option.
이제 다시 Autorun.exe를 실행하고 "라이센스 파일 설치 옵션"을 선택합니다.
Choose the "node-locked using a hardware key or ethernet" option, click next.
When prompted for license file path, browse to c:\flexlm\LICENSE.TXT or
wherever you chose to install your licenses in the make_license.bat file.
If necessary choose "replace existing license".
"node-locked using a hardware key or ethernet" 옵션을 선택하고 다음을 클릭.
라이센스 파일 경로는 물을 때 라이센스 파일 경로는 C:\FLEXlm\license.txt 또는
make_license.bat 파일에서 선택한 라이센스 위치를 선택.
필요하다면 "replace existing license"를 선택.
THATS IT!!!!
Run the software and you should have no pesky demo mode crippling!!!